In this case, if you want to put up an outdoor seesaw, it is very important for everything to be done correctly in order to be safe: As is your safety, and we would really like your seesaw properly adjusted to avoid any injuries on a play set. The following are tips for outdoor seesaw installation which would help in keeping your kids safe.

​

Checking the Soil Strength

It has an even and strong ground underneath the seesaw. The first thing is to check whether the land under it is sturdy and flat This is critical because if the terrain isn't level, there may be a tipping risk when children are playing on it and this can be extremely hazardous. Strong materials like concrete or solid ground anchors will be used to make sure the seesaw does not move around. We can make sure everything is stable seesaw and the grounds are prepared from there our team at RISEN set up the seesaw and you are ready for endless adventures of fun!

Choosing a Safe Surface

Make sure to choose a safe surface for the seesaw to sit on as well. The seesaw landing needs to be free of any such things as rocks, sticks or tree roots that could hurt the dog if it were to jump on up. These dangers could trigger the seesaw to be erratic or worse, and could stumble upon someone then meet a mishap. An even better pick may be a soft ground, like sand, wood chips or artificial grass since these are more likely to prevent injuries when kids fall. Put the seesaw on concrete or asphalt, as this kind of floor is very hard and any fall can result in serious damage to your body.

Checking for Enough Space

You additionally need to guarantee there outdoor playground seesaw is adequate space for kids to securely play around the seesaw. That means looking ahead to ensure that there are no obstructions like trees, poles or playground equipment near the teeter-totter that children could ram into. Falls — Kids needs an open area to swing the seesaw back and forth without hitting anything on either end (a surprise occurrence in essentially every playground plan ever designed). Ensure there is enough clearance either side of the seesaw for children to mount or dismount safely.

Securing the Seesaw

When you are satisfied with the ground, surface and space for a seesaw then anchor it by using strong anchors. The two parts must be large enough to hold the kids playing on the seesaw, so that it does not break them off. We recommend the use of playground equipment anchors such as lag bolts or concrete anchors. Anchors like this will make sure that the seesaw will not tip over and fall when kids are enjoying playing around.

Checking the Seesaw Regularly

After the seesaw is ready, it is crucial to inspect it on a daily basis to ensure its safety. Loose bolts, rust, signs of wear should be pretty easy to spot. If you notice anything that seems damaged, make sure to repair it at once so kids can keep playing safe. This outdoor toy seesaw type of service will enable you to easily identify any potential problems before they have a chance to become major.

In summation, these are the steps you need to follow for a safe installation of an outdoor seesaw. The ground should be supporting, check it properly. Next, opt for an environment that is flat, stable and clear of any obstacles. Third, ensure ample clearance to the sides of the seesaw. Bond robustly with a powerful anchoring system. And, last but not least, keep checking on it to make sure its safe and following the rules of child safety. This is why we want to make sure that playgrounds are safe for adults and children because at RISEN, all we care the most is playing safety.