A valve is a device that is used to regulate the flow of fluid or gas in pipes and systems. It operates similarly to a gate that can open or close, allowing fluid or gas to flow through. The interior of the valve contains a bore, or hole. The bore is the part where the fluid or gas moves through. The width or diameter of this hole is called the valve bore size. Bore sizing is extremely critical as it works safely and efficiently in the entire system with proper sizing.

​

They say, “Go big or go home.

A valve with a larger bore size generally has better performance when compared with one with a smaller bore. The reason is because the bigger the hole, the more fluid or gas can move through it, and at faster rates. Think about trying to take a sip of a thin straw in comparison to drinking from a wide straw. The larger straw allows you to consume your beverage at a faster rate! This is critical, especially when you need to shove large volume of fluid, or gas, at once ( factories, water systems etc.). A small bore size can cause issues too and slow the flow, similar to drinking from a thin straw with it being difficult to drink quickly.

The Effects of Bore Size on Flow and Efficiency

The diameter of the bore has a direct impact on the flow and velocity of either gas or liquid through the valve. When the valve stem hole is too small for the application it can cause a bottleneck, which is when the below get stuck and are unable to move freely. This can cause backlogs, where fluid or gas accumulates and doesn’t reach where it needs to go. That makes the system less efficient, which uses more energy and drives higher bills.

Conversely, if the bore size is excessive, it can lead to turbulence, whereby the fluid or gas becomes chaotic and moves in a swirling fashion. It can develop pressure differences, influencing the flow of the liquid or gas. It is therefore very important that you pick the correct bore size for each individual that the appropriate specifications so that you will everything run smoothly and efficiency.

MAXIMIZING YOUR VALVE EXPERIENCE

This is important because choosing the correct bore size ensures that the tire valve core can pass the maximum amount of fluid or gas needed. On the other hand, if the valve becomes too small, it creates pressure problems and slows everything down, burning resources and eventually increasing costs. This is important, as you should choose a valve with a bore size that is large enough for the needs of that application so that it can perform to the best of its ability.

How to Choose the Appropriate Bore Size for Your Needs

There are several factors you should take into consideration when determining the correct bore size for your needs. You must also think about how quickly the fluid or gas must travel through the piping system along with any pressure losses that may occur and how effectively the complete system functions together. You should also consider the properties of the respective liquid or gas you are using. This includes its viscosity (how thick it is), its temperature, and its pressure.

Sunsoul provides various valves with different bore sizes to meet the different needs of each application. The right valve with the diameter of bore that perfectly meets your individual needs is waiting for you, and our skilled engineers are readily available to help you find it. They help you navigate the process and make sure you are making the best decision for you.

The take home message is; the basics of valve bore size is to be understood! It makes sure the system is operating properly, efficiently, and money saving. Choosing the valve with the right bore size will help you maximize system capacity and get the best results. Sunsoul offers world class tire valve stem and engineering solutions with a focus on high quality to meet the needs of any application. Welcome, and we want you to succeed with your projects and for everything to go smoothly!