For anyone with an outboard boat, the boat motor is paramount in order to keep things running smoothly. There is nothing like a boat motor running smoothly to help you have fun on the water. Regular maintenance is one of the best ways to ensure your motor runs smoothly. This involves checking various components of the engine and ensuring that they are all in proper and working order.

What is Routine Maintenance?

Regular maintenance translates to proper maintenance of your nautical motor. This includes many key things, such as oil and filters checking and changing, greasing the moving parts, and inspecting the fuel system. These simple steps can be extremely effective and will prevent major issues down the road. In short, proper maintenance of your boat motor in the long run keeps this motor up and alternating and saves your boat from running extremely low on power.

​

Best Practices for Your Boat Motor Maintenance

Some straightforward tips to help you maintain your outboard boat motor are:

Change the Oil Often

The oil found in your boat and motor is essential for keeping anything and everything on your boat operating correctly. Oil keeps the moving parts happily lubed, so they don’t overheat, seize up or wear out. Dirty oil can do major harm to the motor. Remember to change the oil to keep your motor running smoothly! As a rule of thumb, check the oil every few trips and change it at least once a season.

Check and Change Filters

Filters are among the most critical components because they keep dirt and debris out of your boat motor’s and string trimmer motor fuel system. If dirt gets into the motor it can create an issue with an expensive fix. As a regular maintenance practice to keep your motor running smoothly, be sure to make regular checks and changes to your boat's filters. Doing this will make sure that your motor is up and running smooth and efficient.

Grease Moving Parts

There are lots of moving parts on your boat, and they need grease to keep from wearing out prematurely. Moving parts without lubrication can rub, causing friction and damage. Regular greasing of your boats moving parts will keep them in working order and improve the performance of your motor. Check and grease parts every few outings and make this a habit.

Look at the Fuel System

The fuel system is nearly critical to the proper functionality of your boat motor. It sends fuel to the engine, and if there are any problems, it can cause the motor and motor saw to run badly. Inspect the fuel system regularly for signs of warping or leakage. If you notice anything wrong, it’s best to directly resolve it. This is going to help catch small issues before they become big problems down the road.

Additional Tips for a Motor That Runs Free and Talented

Here are additional tips to help keep your boat motor in good working order and assist you in having fun on the water:

Use Good Fuel

Using the correct fuel in your boat motor is critical. The performance of your boat is heavily dependent on the type of fuel you use. Use quality fuel that is specified for your boat motor. It might be a tad more expensive, but it will keep your motor running, smooth as silk, and efficiently.

Maintain the Appropriate Engine Temperature

Your boat motor performs optimally at the appropriate operating temperature. It can create catastrophic issues if it overheats. Ensure you are not overheating your motor by regularly checking the temperature. Stop the motor and allow it to cool down before further use, if you notice excessive heating.

Clean Your Boat

As in the case of the hull, cleaning your boat regularly is very important. Keeping it clean will 67prevent rust and damage to your boat motor. Be sure to clean your boat thoroughly every time before using it. That means cleaning things up, getting rid of anything that may cause harm and checking for wear and tear.

Boat Motor Maintenance Made Easy

Here are a few easy ways you can take care of your outboard boat motor:

Check the Oil Level

Find the oil dipstick on the motor and pull it out carefully to see what the oil looks like. Keep wiping it with a rag to remove old oil. Then reinstall it in the motor and pull it out again to check the oil level. Add oil until it reaches the proper level if it is low. Maintaining a close watch on your oil level, however, will keep your motor screaming.

Change the Oil

The first step for changing the oil is to remove the oil drain plug. Let the old oil drain into some kind of receptacle. Should be mentioned to let it drain thoroughly. Then, change the oil filter so that clean oil is going into the motor. After that, pour new oil into the motor. Don’t forget to take the old oil to a recycling center.

Grease Moving Parts

While you are greasing the moving parts of your motor and whipper snipper motor, take a grease gun and apply grease to all the fittings. Greasing all the fittings is also very important to ensure your motor is always properly lubricated. This accomplishes the smooth and long-lasting movement of the parts.

Dos and Don'ts for Motor Care

Below are a few dos and don’ts of caring for your boat motor:

Dos:

Always follow the manufacturer recommended for maintenance.

(11) Use good fuel and oil So you can run better.

Your boat should be free of any debris, dirt, or trash.

Make sure you regularly check the oil and filters for your boat and the same should be done for the oil and filter on the boat.

Don'ts:

Avoid cluttering your boat with too much gear or too many passengers. This can strain the motor.

Ensure your boat motor is properly cooled before running.

Do not disregard warning lights or other alerts on the motor.

Do not skip maintenance such as regular checks and replacing worn-out parts, as it can cause more serious problems in the future.

Conclusion

The fact of the matter is, you could keep your outboard boat motor running smoothly and avoid major defects down the road by regularly maintaining your outboard motor. With regular maintenance and these handy tips, you’ll be able to enjoy your boat for countless years down the line. Just always remember to use good products and follow the manufacturers guidelines and you will be fine. Trust CRAFTOP in guiding you to spend some fun time on the water!