Above all, belts are essential for the proper and efficient functioning of machines. More importantly, they transmit power from the motor to other parts of the sewing machine. For the machine to work as it should, this is a necessary transfer of power. A loose belt can slip and transfer too little power to properly drive a machine. Conversely, if the belt is too taut it will force in on the machinery parts and can cause damage or even break points. That is why it is one of the most important factors that we should periodically check belt tension.

​

Measuring Belt Tension

A belt tension gauge is a tool that we use to measure the belt tension correctly. This Belt Tension Meter tool is to look at how much the belt forces down on that machine. The tension level for the belt depends on what is recommended by the manufacture of your machine. The reason this is important, is because having the correct tension helps us not run into some of issues that we see when our sewing machine has incorrect tensions.

Steps to Measure Belt Tension

Step 1: Turn off the machine

Before we even begin the process of measuring the belt tension, ensure that the machine is switched OFF always. This is the most important for your safety. But before you take any measurements check that the machine is off, for real and stop.

Second step: find the recommended belt tension.

Then we need to grim over the suggestions that are made by the manufacturer for correct belt tension. These details can usually locate inside the user manual that is provided when you bought the machine or on their official website. I need to determine this information in order for us to measure correctly.

Step 3: Define the data points

Next we have to locate the areas where you would take measuremets with a tensiometer User manual etc. those places can be found or you may search online also for detail knowledge on it. Understand that each machine has a different measurement point so audience must select his spot cautiously.

Step 4: Position the belt tension gauge

We used a similar approach testing the belt tension tools gauge at our lift points earlier and we can do so now. Note: As we use a different gauge, care is necessary to follow the instructions that come with each particular needle gauging tool in order for an accurate result.

Step 5: Use Additional Force on the Gauge

This is when youll need to push on the belt tension gauge until we get the correct amount of deflection. It will indicate how much force we are putting on the belt and this gives us guidance to know that you have put your tension correctly.

6: Set the tension of your belts.

If the belt is either too loose or tight after taking measurements, adjustments are necessary. We would need to adjust the tension until this is reached. As always, be sure to stick to the maker-recommended tuning handlings carefully for your protection and as well keeping or good function of it.

Top 10 Missteps in Belt Tension Measurement

We must compile a short list of some common faux pas we should avoid, when checking belt tension.

Error #1: Wrong Gauge

All machines use various belt tension gauges With an incorrect gauge, the measurements that are taken might be wrong and this can lead to very bad machine performance.

Moreover, it is also a mistake not to check the recommendations from the maker. If we take the step for granted, we might measure the tension wrong, and the belt might not work as it should. Thus, before the measurement, always make sure what the maker says for your exact machine. Another dangerous aspect is, for example, when we measure a tension belt is that the machine is on. In that case, it can cause accidents and injuries, which are things to be avoided. Therefore we always have to make sure that the machine stops before the measurement. Finally, the last mistake is that we do not measure from the correct places. Each Belt Tension Gauge machine has specific measuring points. Therefore it is essential to set them in the first place to make an accurate measurement. For the machine to work well and efficiently, belt tension must be maintained. Here are some tips on how to do that best:. One of the essential requirements is that the measurement is taken as often as possible. That way, you can prevent the problem and reduce the machine’s accuracy, preventing any unwanted interruptions. Do not allow dirty machine parts. Dirt and debris can get into the machine, affecting the belt. By observing this advice, we prevent the belt from slipping or becoming too tight. Finally, the tight belt needs replacement. If the belt is torn or worn, it must be replaced so that the machine does not suffer any consequences.

4: Follow the Makers Instructions

Lastly, ensure to follow the manufacturer’s recommendations for belt tensioning and maintenance. Doing this would prevent major issues and keep the machine moving perfectly well.

Conclusion

So, in summary, it is necessary to check belt tension for the better functioning of machines. We must use the appropriate tools and measure correctly as per maker. We can avoid problems and we all work on the machine with it running right by keeping both the belt tension in check as well as keep everything clean. If we implement these best practices and steps then machines works fine for us.