CompensatormanufacturersFactory Introduction The Petroleum Coke Carburizing Agent can be used by manufacturers as auxiliary fuel, and it has the characteristics of high calorific value, low volatile matter, high moisture and high sulfur content, and manufacturers often use it to replace coal. What's more, our products are widely used in steel making, casting, smelting and other industries to get applications. Finally, our products are inexpensive and good quality, which is loved by our customers. Feature The particle size of Petroleum Coke Carburizing Agent is moderate, with large porosity and fast absorption rate. Secondly, our chemical composition is pure, with high carbon and low sulfur, and it has very few harmful components and a very high absorption rate. What's more, the graphite crystal structure of our product is good, which improves the nucleation ability of the original iron solution and increases the number of spherical cast iron in the inoculation process, so that its distribution becomes fine and even with. Finally, our product is an important additive in the steel industry. Usage:聽 1. Adjust the carbon, according to the carbon content of the requirements of melting steel (iron) water, with the metal charge to join the lower part of the converter in the middle, carbon absorption rate can reach 90%-95%, carburizer does not melt when not slagging, otherwise easy to wrap in the waste slag inside, affecting the absorption of carbon. 2. After the steel (iron) water is melted, the carbon content can be adjusted to load the surface of the steel (iron) water, and the carbon can be dissolved and absorbed by the eddy current stirring of the steel (iron) water during the converter melting. The absorption rate is about 85%.CompensatormanufacturersFactory website:http://www.slferrochrome.com/compensator/